WBHO & SRG JV – Wanneroo Road and Ocean Reef Road Interchange Project

Project: WBHO & SRG JV – Wanneroo Road and Ocean Reef Road Interchange Project
Carrier Size: DN900 MSCL pipe
Casing Size: 1200mm RCP
Spacer Model: HDX-125

Kwik-ZIP HDX-125 spacers were utilized to facilitate the sliplining of two service sleeves of 61 and 57 metres in length to support infrastructure modifications for the Wanneroo Road and Ocean Reef Road Interchange Project in Perth, Western Australia.

kwik-ZIP spacer rings were installed at 1M intervals in line with design requirements specified for the cased crossings.

HDX125 SpacerThe project highlights the advantages of kwik-ZIP’s HDX range to support carrier pipe installation on low co-efficient of friction wear pads that resist abrasion from the host pipe surface. The weight of the carrier pipe before and after commissioning (estimated at 271 kg/m and 860 kg/m respectively) highlight the HDX’s ability to deal with heavy pipe and loads.

After installation of the carrier pipes, the annulus was not being grouted to provide the flexibility for the carrier pipes to be removed, (if required) for maintenance or other requirements.

The HDX’s unique load sharing runner system design maximizes spacer weight bearing capacity, reduces point loading and will assist to facilitate removing the carrier pipes if required in the future.

The HDX spacers’ simple and efficient installation process does not require any special tools.

Kwik-ZIP’s spacers have no metal parts and are made from Kwik-ZIP’s engineered thermoplastic blend that is flexible, extremely tough and has a low coefficient of friction.

“The spacers worked as promised and pushed through our 1200 dia. RCP sleeves without any issues.” Michael Hall, Senior Project Engineer – WBHO Infrastructure Pty Ltd.

For further information on kwik-ZIP products and to discuss your specific project requirements please contact us